Electric gate valve is a widely used valve, which is mainly used in the analog regulation of medium flow in liquid, gas and wind systems, and is AI control. In the control of large valves and wind systems, electric valves can also be used for two-position switch control.
The operating principle of the electric gate valve is that the electric gate valve is usually connected by an electric actuator and the valve, and becomes an electric valve after installation and debugging. The electric gate valve uses electric energy as power to connect the electric actuator to drive the valve to realize the opening and closing and adjustment of the valve. So as to achieve the purpose of switching or adjusting the pipeline medium. The working nature of the electric gate valve: the electric valve is generally driven by a motor, which is relatively resistant to voltage shocks. The solenoid valve is quick-opening and quick-closing, and is generally used in small flow and small pressure, where the switching frequency is required to be large. The opening of the electric valve can be controlled, and the state is open, closed, half-open and half-closed, which can control the flow of the medium in the pipeline, but the solenoid valve cannot meet this requirement.
